This is a PC/XT/AT board for controlling up to 4 servo motors simultaneously. A great deal of attention has been paid to RFI immunity. Specifically designed for use near arc welding equipment, high specification opto isolators are used. Also the board Layout is such that no signals form the outside world are routed near any PC bus signals.

This is a PC/XT/AT board for controlling up to 4 stepper motors simultaneously. An option card allows closed loop stepper control via incremental encoders. Also servo motors can be controlled.
You can mix steppers and servos without limit. Specifically
designed for use near arc welding equipment, high specification
opto isolators are used. Also the board Layout is such that no signals form the outside world are routed near any PC bus signals.

 

Details 4 axis stepper control (Step / Direction Fully opto isolated (+/- 2500 volts) 16 opto isolated inputs (24 volt) 8 opto isolated outputs (24 volt,Darlington driver) Multiple cards may be used in the same system Easy to interface software library included British Designed and Built Backed by 12 months warranty and telephone support

Options Encoder input for closed loop operation (see AMT0040) Continuous contouring on all axis Full linear and circular interpolation GNC16 full feature motion control software Applications XYZ routing tables Water Jet Cutting Engraving systems Welding systems Any application requiring servo motor control in an electrically noisy environment.