Products | Amtech Ltd

ESTUN ProNet Series

ESTUN ProNet Series

The ProNet series covers power ranges from 750W to 15kW, the ProNet series servo system adds function including current forward-feedback control, acceleration forward-feedback control, speed and inertia viewer which, in turn, enables the ProNet series servo drive to improve its response performance more than three times than previous products. Furthermore, its ′on-line automatic adjustment function′ can achieve the best servo control effect. ProNet is also designed with expansion module interfaces. It has RS485 and CAN communication interface, in addition, it is able to support MODBUS, CANopen and PROFIBUS communication protocol.

Key Features

  • Auto tuning
  • High Overload Capacity 
  • Communication channels including MODBUS and CANopen and PROFIBUS communication
  • Position, speed and torque control
  • 17-Bit Incremental or absolute encoder
  • Windows Based Software
  • Vibration control



For more information on the range of drives available, specifications and dimensions refer to the example product code below and the datasheet attached.

Example Product Code

The ProNet Series drives are Compatible with the EMG, EMJ, EML and the EMB Series of motors.
 
EMG Series Key Features

  • Various models (0.2kW~1.0kW, with brake etc)
  • Mounted 17 bits incremental/absolute encoder, Optional mounted resolver or wire svaing incremental encoder (2500P/R)
  • IP65 Configuration as standard



EMJ Series Key Features

  • Medium Inertia
  • Peak Torque up to 300% of rated Torque
  • Various models (0.2kW~1.0kW, with brake etc)
  • Run at speeds of up to 4500r/min



EML Series Key Features

  • Various models (0.2kW~1.0kW, with brake etc)
  • Mounted 17 bits incremental/absolute encoder, Optional mounted resolver or wire svaing incremental encoder (2500P/R)
  • IP65 Configuration as standard



EMB Series Key Features

  • Power Supply Voltage: 400V
  • Various models (7.5kW~22kW, with brake etc)
  • Mounted 17 bits incremental/absolute encoder, Optional mounted resolver
  • Temperature Sensor



For more information on the range of motors available, specifications and dimensions refer to the example product code below and the datasheet attached.

Example Motor Product Code


Drive/Motor Compatibility Table


 
Example Setup

LAN PCI








Associated Products:

LAN Motion 12 AMT-PCI-MC4 Servo Card GNC Software Drive Interface Board
Linear Actuators 37 Way Cable Drive Interface Cable

 

AMTECH AUTOMATED MICRO TECHNOLOGY LTD
Samson Close, George Stephenson Industrial Estate, Killingworth,
Newcastle Upon Tyne, NE12 6DX
Tel: +44 (0) 191 268 2022 - Fax: +44 (0) 191 268 2092